043

043

High-quality semi-permanent, reversible coating that gives long-lasting gloss- and colour retention to surfaces.

PRODUCT DESCRIPTION

It is a 1-component, transparent, waterborne acrylate coating that provides long-term protection, gloss- and colour-retention to powdered and chalked coatings and weathered cladding and plastic.
It is dirt- and water-repellent and gives surfaces their original appearance.
It is reversible and is easy to remove alongside the It topcoat by using MultiStrip.

NitoRange consists of a collection of high-quality, protective colour- and shine-retention coatings for non-absorbent surfaces.
Aware of the fact that every surface, situation and object differs, our laboratory has developed a wide range of renovation coatings. Permanent coatings, semi-permanent reversible coatings and colour coatings,, each with their own unique properties. Customization, quality, durability and colour deepening are all represented within the NitoRange!

USE

It has been specially developed for application on non-porous surfaces such as plastic, high-pressure laminate, windowsills, (powdered) aluminium and coated surfaces. In particular powdered window frames on office- and commercial-buildings and powdered facade cladding.

CHARACTERISTICS

• Restores and enhances the original colour of the surface
• Semi-permanent and reversible
• Transparent satin gloss layer
• UV-resistant
• Safe and easy to use

PACKAGING

1 l and 5 l.

CONSUMPTION

50-70m2/L, this depends on the porosity and roughness of the surface.

OPERATING INSTRUCTIONS

1. The pre-treatment of the surface is particularly important for the application of It. Thoroughly clean the surface with Uniclean Low Foaming and rinse with water. If necessary aid with a scotch-brite or power sponge.
2. Use Isopropanol to remove any last residues and to dry the surface.
3. Treat the surface with It Primer.
4. Apply It on a clean and dry surface with a soft squeegee or a power sponge with a microfibre cloth. Work accurately in one direction to prevent streaks and difference in layer thickness.
5. If necessary, apply a second layer after drying (roughly 30 minutes) to repair irregularities.

APPLICATION CONDITIONS

Ambient temperature: minimum 10°C
Substrate temperature: minimum 10°C
Relative humidity: max. 85%

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.